How To Clean A Shower Head With Baking Soda-Step by Step

Let’s learn very quickly about How To Clean A Shower Head With Baking Soda.

We all know how important it is to start in the morning with a fresh mind. A bad morning enables us to ruin all our inner potential for the day. So there is no doubt that the morning shows the whole day. 

Morning showers are a must-do thing that can help us a lot to start the day with a fresh mind. If we found any problem at the time of taking Shower can ruin our mood immediately. 

Now for some simple obvious reasons we sometimes have this happen. One of the biggest reasons is now Shower Head clogging. 

The Shower Head clogging process occurs when minerals, dust, and micro solids and other particles are combined into a water fountain. At that time, the water flow has been damaged. So you will not get the right amount of water flow from your shower head. This is called the Shower Head clogging.

But believe me, you can solve this problem in a very short time. My advice to you that always take the necessary steps before facing the problem. Because then it becomes very easy to solve.

In this post, I will show you some simple steps to give a piece of knowledge to you about How to Clean a Shower Head with Baking Soda step by step. I will also discuss some important facts about it. 

So today, let’s learn something that can be useful to us at any time.

How to clean Shower Head with Baking Soda?

It’s very easy to clean shower head with baking with these following simple steps. Keep in mind this is a DIY technique and very easy to follow. Just follow the instructions given below.

Number One- Uninstall The Shower Head

Firstly take the Shower Head in your hand by uninstalling it from its current position. You may think now, is it possible for me? 

Do not worry! 

Nowadays it’s very easy to finish this shower removing process. Even some of the modern shower heads don’t need any plumbing tools for it. Just check your shower head and find the uninstalling process of that. 

It is easy to reinstall a shower head in the previous location. If you can move it out of place, it will be easier for you to reinstall.

Number Two- Gather all Necessary Items

Now is the time to gather all the essentials for a clean shower head with baking soda.

In my early years, I thought that just a Shower Head and baking soda was enough to finish the process. But it’s not.

In addition to these two items, we need some more elements to complete this task. Check below to see what we need for it.

  • Baking Soda (05 Tablespoon)
  • Clean Water 
  • Vinegar (01 Cup)
  • A Plastic Bag ( 02 times bigger than your Shower Head)
  • A Cleaning Brush
  • A Bowl

Number Three- Start Cleaning

I’ve got some people who are giving you a solid way to clean the Shower Head with baking soda. But practically when I did this I found the easiest and most efficient way to do it. Let me explain to you the detailed procedure.

Step 01: Take the bowl and fill it with quantitative clear water. Now put baking soda and vinegar on it. You can see the bubbles come out a few seconds later.

Don’t be panic to see it. It just makes the perfect cleaning mixture for your Shower Head. 

Step 02: Now it’s for time taking the plastic bag. Check the bag well before working. It is best to check whether the bag is well-sized or can be torn. If you found all ok to you then pour the water mixed with vinegar and baking soda into the bag.

Step 03: At this step, firstly wet the Shower Head with clean water. Then place it in the bag and make sure it is well mixed with a mixture of baking soda and vinegar. Keep this new mixer for a minimum of 07 hours.

Step 04: Seven hours after that, take the Shower Head in your hand. Start by rubbing it around with a brush. Don’t try to finish it too fast. Because this process will remove all the clogging problems from your shower head.

Make sure your clogging issues are removed during your rubbing. Then rinse it with clean water and wipe it with a piece of clean paper. Wait for it to dry completely.


Step 05: This step can make your job a success. Now reinstall the Shower Head in its proper place. Check the water pressure now. I’m sure if you follow the exact same process here, it will satisfy you now.

How to maintain Shower Head to avoid Clogging?

We already know how to clean the Shower Head with baking soda. However, it is always true that alertness is better than cure. So let’s have some ideas on what we need to follow to avoid clogging from the Shower Head.

We can easily avoid clogging from our shower head by following these below steps. 

You can use water filters. Water filters can prevent sewage, hard water, minerals, sand, and many other components.

So, when you use a water filter on your home’s central system, you can get rid of the shower head barrier. This is an effective way and many people use water filters.

In addition, you can also use the filter, especially in your shower head. This is a smart way to prevent disruption. The prices of these types of water filters are reasonable. You can install shower heads with no tools.

Also, you can clean your Shower Head regularly. It can be fraught with trouble, but it is an effective way. Use a scrubber and a sponge to wipe the Shower Head once a day.

Experts advise cleaning the Shower Head immediately after the bath. Use the scrubber to erase the particles. Wipe with a sponge. Your precaution process is done for it.

Which Shower Head is best for lasting use?

It’s also very important to have the right shower head for long-lasting. I’m just here showing a product which I am using for a couple of years. There are a lot of products in the market now with very attractive and modern features. 

However, I did not find any Shower Head company to give more focus to sustainable use. 

So from my practical experience, I can recommend this one just below the Shower Head which is not only long-lasting but also cheaper than anything else.

It may not be any other fancy looking product available on the market. But you can count on it for long-term use.

Conclusion:

You’ve got the answer on how to clean a Shower Head with baking soda, so now you can apply it with your shower head. Remember that you have to follow the whole process step by step. Otherwise, you may not get the best results from it.

If you find any time that this process won’t work then definitely it is the time to buy a new Shower Head.